: Thirteen Simple Rules for Speeding Up Your Web Site
- Make Fewer HTTP Requests
- Use a Content Delivery Network
- Add an Expires Header
- Gzip Components
- Put CSS at the Top
- Move Scripts to the Bottom
- Avoid CSS Expressions
- Reduce DNS Lookups
- Avoid Redirects
- Remove Duplicate Scripts
- Configure ETags
1: Minimize HTTP Requests
80% of the end-user response time is spent on the front-end. Most of this time is tied up in downloading all the components in the page: images, stylesheets, scripts, Flash, etc. Reducing the number of components in turn reduces the number of HTTP requests required to render the page. This is the key to faster pages.
One way to reduce the number of components in the page is to simplify the page’s design. But is there a way to build pages with richer content while also achieving fast response times? Here are some techniques for reducing the number of HTTP requests, while still supporting rich page designs.
Image maps combine multiple images into a single image. The overall size is about the same, but reducing the number of HTTP requests speeds up the page. Image maps only work if the images are contiguous in the page, such as a navigation bar. Defining the coordinates of image maps can be tedious and error prone.
CSS Sprites are the preferred method for reducing the number of image requests. Combine all the images in your page into a single image and use the CSS
background-position properties to display the desired image segment.
Inline images use the
data: URL scheme to embed the image data in the actual page. This can increase the size of your HTML document. Combining inline images into your (cached) stylesheets is a way to reduce HTTP requests and avoid increasing the size of your pages.
Combined files are a way to reduce the number of HTTP requests by combining all scripts into a single script, and similarly combining all stylesheets into a single stylesheet. It’s a simple idea that hasn’t seen wide adoption. The ten top U.S. web sites average 7 scripts and 2 stylesheets per page. Combining files is more challenging when the scripts and stylesheets vary from page to page, but making this part of your release process improves response times.
Reducing the number of HTTP requests in your page is the place to start. This is the most important guideline for improving performance for first time visitors. As described in Tenni Theurer’s blog Browser Cache Usage – Exposed!, 40-60% of daily visitors to your site come in with an empty cache. Making your page fast for these first time visitors is key to a better user experience.
2: Use a Content Delivery Network
The user’s proximity to your web server has an impact on response times. Deploying your content across multiple, geographically dispersed servers will make your pages load faster from the user’s perspective. But where should you start?
As a first step to implementing geographically dispersed content, don’t attempt to redesign your web application to work in a distributed architecture. Depending on the application, changing the architecture could include daunting tasks such as synchronizing session state and replicating database transactions across server locations. Attempts to reduce the distance between users and your content could be delayed by, or never pass, this application architecture step.
Remember that 80-90% of the end-user response time is spent downloading all the components in the page: images, stylesheets, scripts, Flash, etc. This is the Performance Golden Rule, as explained in The Importance of Front-End Performance. Rather than starting with the difficult task of redesigning your application architecture, it’s better to first disperse your static content. This not only achieves a bigger reduction in response times, but it’s easier thanks to content delivery networks.
A content delivery network (CDN) is a collection of web servers distributed across multiple locations to deliver content more efficiently to users. The server selected for delivering content to a specific user is typically based on a measure of network proximity. For example, the server with the fewest network hops or the server with the quickest response time is chosen.
Some large Internet companies own their own CDN, but it’s cost-effective to use a CDN service provider, such as Akamai Technologies, Mirror Image Internet, or Limelight Networks. For start-up companies and private web sites, the cost of a CDN service can be prohibitive, but as your target audience grows larger and becomes more global, a CDN is necessary to achieve fast response times. At Yahoo!, properties that moved static content off their application web servers to a CDN improved end-user response times by 20% or more. Switching to a CDN is a relatively easy code change that will dramatically improve the speed of your web site.
3: Add an Expires Header
Web page designs are getting richer and richer, which means more scripts, stylesheets, images, and Flash in the page. A first-time visitor to your page may have to make several HTTP requests, but by using the Expires header you make those components cacheable. This avoids unnecessary HTTP requests on subsequent page views. Expires headers are most often used with images, but they should be used on all components including scripts, stylesheets, and Flash components.
Browsers (and proxies) use a cache to reduce the number and size of HTTP requests, making web pages load faster. A web server uses the Expires header in the HTTP response to tell the client how long a component can be cached. This is a far future Expires header, telling the browser that this response won’t be stale until April 15, 2010.
Expires: Thu, 15 Apr 2010 20:00:00 GMT
If your server is Apache, use the ExiresDefault directive to set an expiration date relative to the current date. This example of the ExpiresDefault directive sets the Expires date 10 years out from the time of the request.
ExpiresDefault "access plus 10 years"
Keep in mind, if you use a far future Expires header you have to change the component’s filename whenever the component changes. At Yahoo! we often make this step part of the build process: a version number is embedded in the component’s filename, for example, yahoo_2.0.6.js.
Using a far future Expires header affects page views only after a user has already visited your site. It has no effect on the number of HTTP requests when a user visits your site for the first time and the browser’s cache is empty. The impact of this performance improvement depends, therefore, on how often users hit your pages with a primed cache. (A “primed cache” already contains all of the components in the page.) We measured this at Yahoo! and found the number of page views with a primed cache is 75-85%. By using a far future Expires header, you increase the number of components that are cached by the browser and re-used on subsequent page views without sending a single byte over the user’s Internet connection.
4: Gzip Components
The time it takes to transfer an HTTP request and response across the network can be significantly reduced by decisions made by front-end engineers. It’s true that the end-user’s bandwidth speed, Internet service provider, proximity to peering exchange points, etc. are beyond the control of the development team. But there are other variables that affect response times. Compression reduces response times by reducing the size of the HTTP response.
Starting with HTTP/1.1, web clients indicate support for compression with the Accept-Encoding header in the HTTP request.
Accept-Encoding: gzip, deflate
If the web server sees this header in the request, it may compress the response using one of the methods listed by the client. The web server notifies the web client of this via the Content-Encoding header in the response.
Gzip is the most popular and effective compression method at this time. It was developed by the GNU project and standardized by RFC 1952. The only other compression format you’re likely to see is deflate, but it’s less effective and less popular.
Gzipping generally reduces the response size by about 70%. Approximately 90% of today’s Internet traffic travels through browsers that claim to support gzip. If you use Apache, the module configuring gzip depends on your version: Apache 1.3 uses mod_gzip while Apache 2.x uses mod_deflate.
There are known issues with browsers and proxies that may cause a mismatch in what the browser expects and what it receives with regard to compressed content. Fortunately, these edge cases are dwindling as the use of older browsers drops off. The Apache modules help out by adding appropriate Vary response headers automatically.
Servers choose what to gzip based on file type, but are typically too limited in what they decide to compress. Most web sites gzip their HTML documents. It’s also worthwhile to gzip your scripts and stylesheets, but many web sites miss this opportunity. In fact, it’s worthwhile to compress any text response including XML and JSON. Image and PDF files should not be gzipped because they are already compressed. Trying to gzip them not only wastes CPU but can potentially increase file sizes.
Gzipping as many file types as possible is an easy way to reduce page weight and accelerate the user experience.
5: Put CSS at the Top
While researching performance at Yahoo!, we discovered that moving stylesheets to the document HEAD makes pages load faster. This is because putting stylesheets in the HEAD allows the page to render progressively.
Front-end engineers that care about performance want a page to load progressively; that is, we want the browser to display whatever content it has as soon as possible. This is especially important for pages with a lot of content and for users on slower Internet connections. The importance of giving users visual feedback, such as progress indicators, has been well researched and documented. In our case the HTML page is the progress indicator! When the browser loads the page progressively the header, the navigation bar, the logo at the top, etc. all serve as visual feedback for the user who is waiting for the page. This improves the overall user experience.
The problem with putting stylesheets near the bottom of the document is that it prohibits progressive rendering in many browsers, including Internet Explorer. Browsers block rendering to avoid having to redraw elements of the page if their styles change. The user is stuck viewing a blank white page. Firefox doesn’t block rendering, which means when the stylesheet is done loading it’s possible elements in the page will have to be redrawn, resulting in the flash of unstyled content problem.
The HTML specification clearly states that stylesheets are to be included in the HEAD of the page: “Unlike A, [LINK] may only appear in the HEAD section of a document, although it may appear any number of times.” Neither of the alternatives, the blank white screen or flash of unstyled content, are worth the risk. The optimal solution is to follow the HTML specification and load your stylesheets in the document HEAD.
6: Move Scripts to the Bottom
With stylesheets, progressive rendering is blocked until all stylesheets have been downloaded. That’s why it’s best to move stylesheets to the document HEAD, so they get downloaded first and rendering isn’t blocked. With scripts, progressive rendering is blocked for all content below the script. Moving scripts as low in the page as possible means there’s more content above the script that is rendered sooner.
The second problem caused by scripts is blocking parallel downloads. The HTTP/1.1 specification suggests that browsers download no more than two components in parallel per hostname. If you serve your images from multiple hostnames, you can get more than two downloads to occur in parallel. (I’ve gotten Internet Explorer to download over 100 images in parallel.) While a script is downloading, however, the browser won’t start any other downloads, even on different hostnames.
In some situations it’s not easy to move scripts to the bottom. If, for example, the script uses
document.write to insert part of the page’s content, it can’t be moved lower in the page. There might also be scoping issues. In many cases, there are ways to workaround these situations.
An alternative suggestion that often comes up is to use deferred scripts. The
DEFER attribute indicates that the script does not contain document.write, and is a clue to browsers that they can continue rendering. Unfortunately, Firefox doesn’t support the
DEFER attribute. In Internet Explorer, the script may be deferred, but not as much as desired. If a script can be deferred, it can also be moved to the bottom of the page. That will make your web pages load faster.
7: Avoid CSS Expressions
CSS expressions are a powerful (and dangerous) way to set CSS properties dynamically. They’re supported in Internet Explorer, starting with version 5. As an example, the background color could be set to alternate every hour using CSS expressions.
background-color: expression( (new Date()).getHours()%2 ? "#B8D4FF" : "#F08A00" );
As shown here, the
expression method is ignored by other browsers, so it is useful for setting properties in Internet Explorer needed to create a consistent experience across browsers.
The problem with expressions is that they are evaluated more frequently than most people expect. Not only are they evaluated when the page is rendered and resized, but also when the page is scrolled and even when the user moves the mouse over the page. Adding a counter to the CSS expression allows us to keep track of when and how often a CSS expression is evaluated. Moving the mouse around the page can easily generate more than 10,000 evaluations.
One way to reduce the number of times your CSS expression is evaluated is to use one-time expressions, where the first time the expression is evaluated it sets the style property to an explicit value, which replaces the CSS expression. If the style property must be set dynamically throughout the life of the page, using event handlers instead of CSS expressions is an alternative approach. If you must use CSS expressions, remember that they may be evaluated thousands of times and could affect the performance of your page.
9: Reduce DNS Lookups
The Domain Name System (DNS) maps hostnames to IP addresses, just as phonebooks map people’s names to their phone numbers. When you type http://www.yahoo.com into your browser, a DNS resolver contacted by the browser returns that server’s IP address. DNS has a cost. It typically takes 20-120 milliseconds for DNS to lookup the IP address for a given hostname. The browser can’t download anything from this hostname until the DNS lookup is completed.
DNS lookups are cached for better performance. This caching can occur on a special caching server, maintained by the user’s ISP or local area network, but there is also caching that occurs on the individual user’s computer. The DNS information remains in the operating system’s DNS cache (the “DNS Client service” on Microsoft Windows). Most browsers have their own caches, separate from the operating system’s cache. As long as the browser keeps a DNS record in its own cache, it doesn’t bother the operating system with a request for the record.
Internet Explorer caches DNS lookups for 30 minutes by default, as specified by the
DnsCacheTimeout registry setting. Firefox caches DNS lookups for 1 minute, controlled by the
network.dnsCacheExpiration configuration setting. (Fasterfox changes this to 1 hour.)
When the client’s DNS cache is empty (for both the browser and the operating system), the number of DNS lookups is equal to the number of unique hostnames in the web page. This includes the hostnames used in the page’s URL, images, script files, stylesheets, Flash objects, etc. Reducing the number of unique hostnames reduces the number of DNS lookups.
Reducing the number of unique hostnames has the potential to reduce the amount of parallel downloading that takes place in the page. Avoiding DNS lookups cuts response times, but reducing parallel downloads may increase response times. My guideline is to split these components across at least two but no more than four hostnames. This results in a good compromise between reducing DNS lookups and allowing a high degree of parallel downloads.
11: Avoid Redirects
Redirects are accomplished using the 301 and 302 status codes. Here’s an example of the HTTP headers in a 301 response:
HTTP/1.1 301 Moved Permanently Location: http://example.com/newuri Content-Type: text/html
The browser automatically takes the user to the URL specified in the
Location field. All the information necessary for a redirect is in the headers. The body of the response is typically empty. Despite their names, neither a 301 nor a 302 response is cached in practice unless additional headers, such as
The main thing to remember is that redirects slow down the user experience. Inserting a redirect between the user and the HTML document delays everything in the page since nothing in the page can be rendered and no components can start being downloaded until the HTML document has arrived.
One of the most wasteful redirects happens frequently and web developers are generally not aware of it. It occurs when a trailing slash (/) is missing from a URL that should otherwise have one. For example, going to http://astrology.yahoo.com/astrology results in a 301 response containing a redirect to http://astrology.yahoo.com/astrology/ (notice the added trailing slash). This is fixed in Apache by using
mod_rewrite, or the
DirectorySlash directive if you’re using Apache handlers.
Connecting an old web site to a new one is another common use for redirects. Others include connecting different parts of a website and directing the user based on certain conditions (type of browser, type of user account, etc.). Using a redirect to connect two web sites is simple and requires little additional coding. Although using redirects in these situations reduces the complexity for developers, it degrades the user experience. Alternatives for this use of redirects include using
mod_rewrite if the two code paths are hosted on the same server. If a domain name change is the cause of using redirects, an alternative is to create a CNAME (a DNS record that creates an alias pointing from one domain name to another) in combination with
12: Remove Duplicate Scripts
Unnecessary HTTP requests happen in Internet Explorer, but not in Firefox. In Internet Explorer, if an external script is included twice and is not cacheable, it generates two HTTP requests during page loading. Even if the script is cacheable, extra HTTP requests occur when the user reloads the page.
One way to avoid accidentally including the same script twice is to implement a script management module in your templating system. The typical way to include a script is to use the SCRIPT tag in your HTML page.
An alternative in PHP would be to create a function called
<?php insertScript("menu.js") ?>
In addition to preventing the same script from being inserted multiple times, this function could handle other issues with scripts, such as dependency checking and adding version numbers to script filenames to support far future Expires headers.
13: Configure ETags
Entity tags (ETags) are a mechanism that web servers and browsers use to determine whether the component in the browser’s cache matches the one on the origin server. (An “entity” is another word for what I’ve been calling a “component”: images, scripts, stylesheets, etc.) ETags were added to provide a mechanism for validating entities that is more flexible than the last-modified date. An ETag is a string that uniquely identifies a specific version of a component. The only format constraints are that the string be quoted. The origin server specifies the component’s ETag using the
ETag response header.
HTTP/1.1 200 OK Last-Modified: Tue, 12 Dec 2006 03:03:59 GMT ETag: "10c24bc-4ab-457e1c1f" Content-Length: 12195
Later, if the browser has to validate a component, it uses the
If-None-Match header to pass the ETag back to the origin server. If the ETags match, a 304 status code is returned reducing the response by 12195 bytes for this example.
GET /i/yahoo.gif HTTP/1.1 Host: us.yimg.com If-Modified-Since: Tue, 12 Dec 2006 03:03:59 GMT If-None-Match: "10c24bc-4ab-457e1c1f" HTTP/1.1 304 Not Modified
The problem with ETags is that they typically are constructed using attributes that make them unique to a specific server hosting a site. ETags won’t match when a browser gets the original component from one server and later tries to validate that component on a different server, a situation that is all too common on Web sites that use a cluster of servers to handle requests. By default, both Apache and IIS embed data in the ETag that dramatically reduces the odds of the validity test succeeding on web sites with multiple servers.
The ETag format for Apache 1.3 and 2.x is
inode-size-timestamp. Although a given file may reside in the same directory across multiple servers, and have the same file size, permissions, timestamp, etc., its inode is different from one server to the next.
IIS 5.0 and 6.0 have a similar issue with ETags. The format for ETags on IIS is
ChangeNumber is a counter used to track configuration changes to IIS. It’s unlikely that the
ChangeNumber is the same across all IIS servers behind a web site.
The end result is ETags generated by Apache and IIS for the exact same component won’t match from one server to another. If the ETags don’t match, the user doesn’t receive the small, fast 304 response that ETags were designed for; instead, they’ll get a normal 200 response along with all the data for the component. If you host your web site on just one server, this isn’t a problem. But if you have multiple servers hosting your web site, and you’re using Apache or IIS with the default ETag configuration, your users are getting slower pages, your servers have a higher load, you’re consuming greater bandwidth, and proxies aren’t caching your content efficiently. Even if your components have a far future
Expires header, a conditional GET request is still made whenever the user hits Reload or Refresh.
If you’re not taking advantage of the flexible validation model that ETags provide, it’s better to just remove the ETag altogether. The
Last-Modified header validates based on the component’s timestamp. And removing the ETag reduces the size of the HTTP headers in both the response and subsequent requests. This Microsoft Support article describes how to remove ETags. In Apache, this is done by simply adding the following line to your Apache configuration file: